| Bearing no. | MR105 |
|---|
| Bore diameter | d | 5 mm0.1969 inch |
|---|
| Outer diameter | D | 10 mm0.3937 inch |
|---|
| Inner ring width | B | 3 mm0.1181 inch |
|---|
| Outer ring width | C | 3 mm0.1181 inch |
|---|
| Inner ring chamfer dimension | rsi min | 0.15 mm0.0059 inch |
|---|
| Outer ring chamfer dimension | rse min | 0.15 mm0.0059 inch |
|---|
| Basic dynamic load rating | Cr | 432 N |
|---|
| Basic static load rating | Cor | 168 N |
|---|
| Limiting speed | Grease | 60000 min-1 |
|---|
| Oil | 71000 min-1 |
|---|
| Abutment and fillet dimensions | da min | 5.9 mm0.2323 inch |
|---|
| da max | 5.9 mm0.2323 inch |
|---|
| Da min | 7.9 mm0.311 inch |
|---|
| Da max | 8.8 mm0.3465 inch |
|---|
| rasi max | 0.15 mm0.0059 inch |
|---|
| rase max | 0.15 mm0.0059 inch |
|---|
| Ball size × quantity | 1.200 mm0.0472 inch × 8 |
|---|
| Mass (reference) | 0.94 g |
|---|
The above values are subject to change without notice for the improvement of products or other purposes. We have prepared this table with sufficient care, and we cannot be held responsible for any damage caused by possible errors or omissions.
