| Bearing no. | R10 |
|---|
| Bore diameter | d | 15.875 mm0.625 inch |
|---|
| Outer diameter | D | 34.925 mm1.375 inch |
|---|
| Inner ring width | B | 7.142 mm0.2812 inch |
|---|
| Outer ring width | C | 7.142 mm0.2812 inch |
|---|
| Inner ring chamfer dimension | rsi min | 0.8 mm0.0315 inch |
|---|
| Outer ring chamfer dimension | rse min | 0.8 mm0.0315 inch |
|---|
| Basic dynamic load rating | Cr | 6000 N |
|---|
| Basic static load rating | Cor | 3270 N |
|---|
| Limiting speed | Grease | 20000 min-1 |
|---|
| Oil | 24000 min-1 |
|---|
| Abutment and fillet dimensions | da min | 20.5 mm0.8071 inch |
|---|
| da max | 23 mm0.9055 inch |
|---|
| Da min | 30.5 mm1.2008 inch |
|---|
| Da max | 31.5 mm1.2402 inch |
|---|
| rasi max | 0.8 mm0.0315 inch |
|---|
| rase max | 0.8 mm0.0315 inch |
|---|
| Ball size × quantity | 4.762 mm0.1875 inch × 10 |
|---|
| Mass (reference) | 29.8 g |
|---|
The above values are subject to change without notice for the improvement of products or other purposes. We have prepared this table with sufficient care, and we cannot be held responsible for any damage caused by possible errors or omissions.
