| Bearing no. | R10 2RS |
|---|
| Bore diameter | d | 15.875 mm0.625 inch |
|---|
| Outer diameter | D | 34.925 mm1.375 inch |
|---|
| Inner ring width | B | 8.733 mm0.3438 inch |
|---|
| Outer ring width | C | 8.733 mm0.3438 inch |
|---|
| Inner ring chamfer dimension | rsi min | 0.8 mm0.0315 inch |
|---|
| Outer ring chamfer dimension | rse min | 0.8 mm0.0315 inch |
|---|
| Basic dynamic load rating | Cr | 6790 N |
|---|
| Basic static load rating | Cor | 3330 N |
|---|
| Limiting speed | Grease | 13000 min-1 |
|---|
| Oil | 13000 min-1 |
|---|
| Abutment and fillet dimensions | da min | 20.5 mm0.8071 inch |
|---|
| da max | 21 mm0.8268 inch |
|---|
| Da min | 31 mm1.2205 inch |
|---|
| Da max | 31.5 mm1.2402 inch |
|---|
| rasi max | 0.8 mm0.0315 inch |
|---|
| rase max | 0.8 mm0.0315 inch |
|---|
| Ball size × quantity | 5.556 mm0.2187 inch × 8 |
|---|
| Mass (reference) | 34.3 g |
|---|
The above values are subject to change without notice for the improvement of products or other purposes. We have prepared this table with sufficient care, and we cannot be held responsible for any damage caused by possible errors or omissions.
